Full-Service Roofing | Amber, OK
Amber Roofing & Maintenance offers a complete range of roofing services in Amber and Leon, Moyers, Ponca City, Sharon, Tuttle. Every job gets the same attention. Big or small.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →
Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Amber homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →
Storm Damage Repair
Not all storm damage qualifies for a full replacement. Hail might only damage one slope. Wind might only lift shingles on the windward side. We document exactly what's damaged and let the insurance company make the call. Honest documentation gets claims approved. Inflated claims get denied.
Get a Free Quote →
New Roof Installation
We handle new construction from permits through final inspection. Our Amber office coordinates with your builder on scheduling, material delivery, and inspection timing. Typical install time is 1-3 days depending on size and complexity.
Get a Free Quote →
Metal Roofing
We install 24-gauge and 26-gauge steel standing seam panels in Galvalume and pre-painted finishes. Concealed fastener clips allow the panels to expand and contract with temperature changes without stress on the fasteners. That's why standing seam doesn't leak. The clips float.
Get a Free Quote →
Shingle Roofing
Asphalt shingles cover more homes in America than every other roofing material combined. There's a reason. They're affordable, they look good, they last 25-50 years depending on the grade, and they come in dozens of colors and profiles. Our Amber crews have installed thousands of shingle roofs and we know the product better than most roofers in the state.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane is our most-installed flat roof system in Amber. White reflective surface reduces cooling costs, hot-air welded seams are watertight, and 15-20 year manufacturer warranties are standard. Available in 45-mil, 60-mil, and 80-mil thickness.
Get a Free Quote →
Commercial Roofing
We install Carlisle SynTec and Firestone TPO membrane systems in 60-mil and 80-mil thickness over minimum R-25 polyiso insulation (more in climate zones requiring it). Seams hot-air welded at 900°F+ and tested with a seam probe. Fully adhered systems for wind uplift zones per FM I-90 or I-120. Mechanically attached for re-roofs over existing insulation. NRCA member, trained per manufacturer specifications.
Get a Free Quote →
Gutter Installation
Clogged gutters cause fascia rot, soffit damage, and foundation erosion from concentrated water runoff. That's not a marketing scare tactic. We see the damage on every other gutter replacement in Amber. Properly sized gutters with adequate downspout capacity move water away from the house. We calculate capacity using rainfall intensity data for Amber: roof area x pitch factor x rainfall rate in inches per hour. Standard 5" K-style handles 5,520 square feet of effective roof area.
Get a Free Quote →
Roof Inspection
Roof inspections are free for Amber homeowners. No strings, no obligation to hire us for repairs. If your roof is fine, we say so. If it needs attention, you get an honest assessment of what's going on and what it'll cost to fix.
Get a Free Quote →
Emergency Roof Repair
When a tree goes through your roof at 2 AM, you need someone who answers the phone and shows up with a truck full of materials. Call (877) 586-1316. We handle roofing emergencies in Amber 7 days a week, including holidays.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →